Thursday, November 17, 2011

TYPE-I Modem Configuration - Huawei SmartAX MT880 Modem / SmartAx MT882 ADSL Modem Configuration bsnl configuration setup

TYPE-I Modem Configuration - Huawei SmartAX MT880 Modem / SmartAx MT882 ADSL Modem Configuration

SmartAx MT880 ADSL Modem has One ethernet Port.
SmartAx MT882 ADSL Modem has One ethernet Port and one USB Port.

Set your computer IP address as 192.168.1.2
( If you are using USB port, install USB driver first)

Open Internet Explorer in the Address bar type the URL http://192.168.1.1

You will be propted for Username and Password.

Username: admin

Password: admin


Click on Home


Click on WAN setting


Your WAN Setting should be as follows:

PVC No.: PVC0

Wan type: PPP

Connection Type : PPPoE

VPI / VCI : 0/35

Default Route : Enabled

Username: yourusername@dataone

Password: yourpassword

Use DNS : Enabled

Click on Apply.


You will be asked to save and reboot.

Select Yes


Once your modem is rebooted , the summary page will be displayed .


The "Green" status of PVC0 status indicated that you are now connected. (in Summary page)

SmartAx MT882 ADSL Modem ADSL LED will turn 'Orange' from 'green' when succesfully connected.

1 comment:

  1. I did that but still not getting connected is ther anythng else to be done...do i need to dial a connection

    ReplyDelete